Dinesh Irrigation

Our Products Range

HDPE PIPES & COILS

HDPE Pipes are manufactured from High-Density Poly Ethylene Polymers i.e. PE-63, PE 80, and PE 100. HDPE Pipes are available in sizes 20mm to 500mm (Size can be increased, if necessary) outer diameter and pressure rating from 2.5 to PN 16.0.

BIS Standard

Hdpe Pipes & Coils to be used in the system are made up from 100% virgin High Density Polyethylene Granules. It also compare or passes the BIS standard mark as per IS 4984 : 2016.

Applications

Water Supply Systems

* In water supply distribution systems

* As a replacement of G. I. Pipes in Borewell application to submersible pumps.

* For suction and delivery lines of jet pumps and centrifugal pumps.

Industrial applications

* Disposal of corrosive effluents chemicals and treated/untreated wastes.

* Acids and Alkalies can be transported through these pipes.

* For conveying edible oils, fruit pulps, juices, milk, and other food products.

* As ducts for Air conditioning and ventilation.

* For transporting slurries of Iron Ore, Fly Ash, etc.

Environmental Protection

* HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.

* For drainage of sewerage

* For disposal of sand slurry in dredging operations.

Advantages

* Low specific weight and flexibility

* Perfect weldability, tough and strong

* Abrasion and wear-resistant

* Good chemical and weathering resistance

* Low co-efficient of friction

MDPE PIPES

MDPE Pipes are manufactured out of bimodal cadmium-free imported raw material and tested under a fully integrated Quality Assurance System (QAS) which covers all aspects of design and manufacture from raw material selection to final product testing (both destructive and non-destructive), to ensure that high-performance standards established for the products are consistently achieved.

ISO & BIS Standard

These pipes confirm to various International standards such as ISO 4437,BS 7281,DIN 8074/75 and BIS Standard IS : 14885 : 2001.

Material

The raw material used is Medium Density Poly Ethylene (MDPE) PE-80 and PE 100 is used for the production of Gas Pipes.

Product Range

These Pipes are manufactured in the range of 20mm to 500 mm (Outer Diameter) in all pressure ratings.

These Pipes are identified by their colour for different uses for eg.Yellow for Gas,Orange for Petrol and Blue for Water.These Pipes can tailor make to meet specific requirements of individual Gas Customers.

Salient Features:-

Poly Ethylene Pipes have been used the world over for natural gas distribution at 4 Bar Pressure, due to their excellent technical and operational advantages as a pipe material.

* Flexible: Easy to handle

* Corrosion Resistant: Tough and highly reliable in aggressive soils.

* Fusion Joints: High Integrity and reliability

* Light Weight: Light in weight as compared to metal pipes.

* Crack Resistant: Excellent resistance to subsidence, traffic vibrations, point leading, and marshy ground.

* Homogenous: Leakage-free joints.

* Installation: Low installation cost.

HDPE SPRINKLER SYSTEM

Worldwide HDPE Sprinkler System is found to be the best method to get maximum yield at a low cost. It has been observed that a sprinkler system can irrigate 2 to 3 times more farmland in the same quantum of water. The sprinkler helps in cleaning the surface of the plants, thereby helping them in easy photosynthesis. This results in greater yield. In the winter season, the sprinkler system saves the surface of the plants from the accumulation of frozen water and in summers it saves evaporation of water to the tune of 40%. The sprinkler system spreads the water in the farmland uniformly and thus saves the plants from water clogging and scarcity. Maximum water reaches the roots of the plants.

BIS Standard

All Pipes process with the BIS standard as per IS : 14151 Part – I & II.

Product Range

HDPE Sprinkler pipes are available in sizes ranging from 63 mm to 200 mm outer diameter and pressure rating from Class I to IV, PN 2.5, PN 3.2, PN 4.0, PN 6.0 (Part I & II) with a complete range of fittings.

Associated Accessories

* Coupled Bend

* Coupled Tee

* End Caps

* Riser Pipe

* Sprinkler Nozzle

* Pump Connecting Nipple (PCN)

* Sprinkler attachment with foot batton

Advantages

* Saving in use of water 40% to 50%

*Saving in time, labor

*Saving on electricity

* Increase in production of crops

* Easy water distribution

SWR PIPES & FITTINGS

SWR Pipes and fittings are manufactured by compounding uPVC resin along with chemicals such as heat stabilizers, processing aids, lubricants, benzotriazole, and phosphate-based UV stabilizers which noticeably improve the light stability of uPVC, prevent yellowing, embrittlement, and loss of mechanical strength.

BIS Standard

Pipe Specification as per IS : 13592 : 2013

Product Range

Self: These pipes have bell-type sockets at one end. Available in 40 to 160mm sizes.

Ring-o-socket: These pipes have ring-type sockets at one end. Available in 40 to 160mm sizes.

Advantages

* Easy to install

* Highly resistant to chemical, acid, alkalies, cement, lime, oils, and domestic affluents.

* Free flow and durable

* Unaffected by termite, Bacteria, and fungus.

UPVC BLUE CASING PIPE

It is made of unplasticized Poly Vinyl Chloride, Suspension grade, K value 65-67, a bulk polymer suitable for pressure pipes. uPVC has properties that allow it to be used as a replacement for and often an advantage over traditional materials such as cast iron, asbestos cement, etc. available in Type cm, DN 100-200 mm, Type cs, DN 150-200mm & rs DN 150-200 mm.

BIS Standard

Dinesh uPVC pipes are manufactured conforming to IS 4985: 2000

Advantages

* Smooth bore for better flow properties

* Do not support bacterial growth

* Chemical and Corrosion resistance

* High Impact strength

* Easy installation

* Long-lasting

* Lightweight

* Elegance

* Overall economy

UPVC RIGID & ELASTOMERIC SEAL RING FIT PIPE

This Pipe is made of unplasticized Poly Vinyl Chloride (uPVC). It is a versatile plastic having an excellent combination of strength, chemical inertness, and fire resistance, which gives optimum performance at very low and very high temperatures like 00 to 600 C for pressure rating.

BIS Standard

Dinesh uPVC pipes are manufactured conforming to IS 4985: 2000

Benefits

Corrosion-resistant pressure pipe

Resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens

Best in chemical processing, plating, high purity applications, potable water systems, water, and wastewater treatment, irrigation, agriculture, and other industrial applications involving corrosive fluid transfer.

Plumbing and drainage systems in the dwelling houses.

Reliable leak-proof joints.

Size

a) 90 mm to 315 mm OD Cl plain ended & socketed pipe for solvent cement jointing.

b) 63 mm to 315 mm OD Cl plain ended & socketed pipe for solvent cement jointing.

c) 40 mm to 180 mm OD Cl plain ended & socketed pipe for solvent cement jointing.

d) 40 mm to 315 mm OD Cl socket ended with an elastomeric sealing ring.

Dimensions of Elastomeric Sealing Ring Type Unplasticized PVC Pipes as per IS: 4985-2000 for use in Water Supply

(All Dimensions in Millimeters)

DRIP IRRIGATION SYSTEM

Drip Irrigation is a type of Micro-Irrigation system that has the potential to save water and nutrients by allowing water to drip slowly to the roots of plants, either from above the soil surface or buried below the surface. In Drip Irrigation water from the water source is lifted by a pumping unit & conveyed directly to the field by a closed conduit piping network without any conveyance losses. Dinesh Drip Irrigation Systems are uniquely engineered to deliver a measured quantity of water directly at the root zone of each plant at regular intervals. This is to ensure that the plants do not experience pressure for water & nutrients. The drip Irrigation system includes ISI marked Mainline, Sub-Mainline, Integral drip lines lateral, Dripper and is supported by a wide range of fittings to suit various conditions. Drip Irrigation system usually operated through ISI marked Plastic Screen/Disc filter, Plastic Hydro-cyclone filter, Plastic Head Unit, Valves, Ventury & Online Dripper, etc.

BIS Standards:

Flat & Round Emitting Pipe standard IS: 13488: 2008 is successfully performs main part of drip irrigation systems.

lateral Standard IS: 12786: 1989 tubes are used as a sub main/lateral pipe in drip & mini irrigation system.

Advantages

Reduces Pressure on the crop and Supplies water as per need

Saving in use of water 60% to 70%

Saving in Labour, Electricity & Time

Increase in quality with more yield

Even the distribution of water

EMITTERS

BIS Standards:

IS: 13487: 1992

Available Sizes are

2 LPH Category B

4 LPH Category B

8 LPH Category B

L.L.D.P.E. LATERAL PIPES

BIS Standards

lateral Standard IS: 12786: 1989 tubes are used as a sub main/lateral pipe in drip & mini irrigation system.

Available Sizes are

12 mm OD CL-2

16 mm OD CL-2

20 mm OD CL-1,CL-2,CL-3

25 mm OD Cl-1,Cl-2,CL-3

32 mm OD CL-1,CL-2,Cl-3

MINI SPRINKLER SYSTEM

Mini Sprinklers irrigation offers a complete line of sprinkler solutions for a wide range of crops seasonal crops like vegetables, onions, potatoes, nurseries, etc. Dinesh Mini Sprinkler irrigation is a flexible system that can be used to supply adequate moisture for plant growth. It is a mixed system where the main & sub-main pipeline is permanently fixed, whereas the field unit is foldable using compression fittings, low discharge plastic nozzles & tubing.

Advantages

Optimum use of water

Cost of labor in preparing/Digging canals & Channels is eliminated

Uneven land can be irrigated

Increases quality & quantity of the crop

LANDSCAPE IRRIGATION

POP UP Sprinkler 250-400 lph

Spray Zet 150-300 lph

PVC Pipes

uPVC pipes are a multipurpose product with a wide range of applications in portable water transportation (underground pipelines) for agriculture farms & domestic water supply lines, Agriculture & Domestic tubes wells, also they are often applied as drain pipes in residential, commercial & industrial building. Dinesh uPVC pressure pipe offers a maintenance-free solution for longer life.

BIS Standard

Dinesh uPVC pipes are manufactured conforming to IS 4985: 2000

Usage/Application	Agricultural
Thickness	3 mm
Size/ Diameter	130 mm
Working Pressure	2.5 Kg/sqcm
Type	Hard Tube
Shape	Round
Country of Origin	Made in India

Irrigation Sprinklers

Sprinkler Irrigation is a method of applying irrigation water that provides a rainfall-like effect. Water is distributed through a system of pipes usually by pumping. It is then sprayed into the air and the entire soil surface is irrigated through spray heads so that it breaks up into small water droplets that fall on the ground.
Sprinklers provide efficient coverage for small to large areas and are suitable for use on all types of farmlands. It is also adaptable to nearly all types of irrigable soils as sprinklers are available in a wide range of discharge capacities.

Casing Pipes

Shape	Round
Length	3m
Color	Blue
Material	Plastic
Thickness	3mm
Size	150 to 250mm

Plumbing Pipe

Type	Hardtube
Brand	Dinesh
Material	Polyvinyl chloride
Carat	3m
Shape	Round
Usages	Plumbing

Household MDPE Piping System

Material	MDPE
Size/Diameter	12 INCH TO 1 INCH
Length of Pipe	UPTO 750 METER
Brand	DINESH
Pipe Class	PN 10 TO PN 16
Color	Blue
Shape	Round
Usage/Application	HOUSHOLD WATER CONNECTION
Country of Origin	Made in India

All Products

Our Products Range

HDPE PIPES & COILS

MDPE PIPES

HDPE SPRINKLER SYSTEM

SWR PIPES & FITTINGS

UPVC BLUE CASING PIPE

UPVC RIGID & ELASTOMERIC SEAL RING FIT PIPE

DRIP IRRIGATION SYSTEM

EMITTERS

L.L.D.P.E. LATERAL PIPES

MINI SPRINKLER SYSTEM

LANDSCAPE IRRIGATION

PVC Pipes

Irrigation Sprinklers

Casing Pipes

Plumbing Pipe

Household MDPE Piping System

Request A Quote